Useful reference tools
Audio & Studio Calculators
Quick calculations for acoustics, recording, timing and system setup. Results are calculated in your browser and nothing is submitted.
SPL vs. distance
Wavelength
Recording storage
Delay & distance
dB ratios
Room modes
Sabins & RT60
Phase & path
Transfer time
Sound Level vs. Distance Estimate free-field sound-pressure level at a new distance from a point source.
Known level dB SPL
Known distance ft
New distance ft
Uses the inverse-square free-field relationship. Reflections, boundaries, source directivity and line-source behavior can change real-world results.
Open the full SPL vs. distance guide →
Audio Wavelength Convert frequency to wavelength using air temperature to estimate the speed of sound.
Frequency Hz
Air temperature °F
Useful for room acoustics, loudspeaker spacing, microphone placement and understanding low-frequency dimensions.
Open the full frequency & wavelength guide →
Recording Storage Estimate uncompressed PCM audio storage for multitrack sessions.
Sample rate44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz
Bit depth16-bit 24-bit 32-bit
Tracks / channels
Hours
This is raw PCM data only; DAW project files, edits, backups, alternate takes and file-system overhead require additional space.
Open the full recording storage guide →
Delay & Distance Convert acoustic path distance to arrival-time delay and digital samples.
Distance ft
Air temperature °F
Sample rate44.1 kHz 48 kHz 96 kHz 192 kHz
Useful for loudspeaker alignment, acoustic timing estimates and translating path-length differences into DAW delay values.
Open the full delay & distance guide →
dB Ratio Converter Convert decibels to voltage/amplitude ratio or power ratio.
Level difference dB
Ratio typeVoltage / amplitude Power
Amplitude ratios use 20 log10; power ratios use 10 log10. Negative dB values produce ratios below 1.
Axial Room Modes Calculate the first five axial modes for a rectangular room.
Length ft
Width ft
Height ft
Air temperature °F
These are axial modes only. Tangential/oblique modes, construction, openings and damping also affect low-frequency behavior.
Open the full room mode guide →
Path Difference & Phase Convert an acoustic path-length difference into delay and phase shift at a chosen frequency.
Path difference in
Frequency Hz
Air temperature °F
Useful when estimating comb-filtering risk from spaced microphones or unequal acoustic paths.
Open the full path & phase guide →
Sabin Absorption & RT60
Calculate equivalent absorption area from multiple room surfaces, estimate Sabine RT60 and compare existing absorption with a target reverberation time.
Open Sabin calculator →
File Transfer Time Estimate how long an audio session or archive will take to upload or download.
File size GB
Connection speed Mbps
Efficiency100% theoretical 90% practical 80% conservative
Actual transfer time varies with protocol overhead, server limits, congestion, Wi-Fi conditions and storage performance.