Technical Articles
SHRUB: Steve Duda Puts Serum Inside a $70 Synthesizer — And You Can Play It for Free
In this article
Xfer Records has squeezed a surprisingly substantial version of Serum into the inexpensive M-VAVE FM-1. The interesting part? You don’t even need the hardware to try it.
Every once in a while, something comes along in the audio world that makes you wonder whether the traditional relationship between hardware, software, and price has become completely ridiculous.
SHRUB might be one of those things.
Steve Duda, the developer behind Xfer Records’ enormously successful Serum synthesizer, has released a free, scaled-down version of Serum designed to run on the M-VAVE FM-1, an inexpensive little synthesizer that sells for approximately $70.
Yes, that Serum.
And no, you don’t need to purchase an FM-1 to find out what SHRUB does. You can run it in a web browser. The project is currently in beta, but it already represents a fascinating development in affordable music technology.
A Little Background
Serum is one of the best-known wavetable synthesizers in contemporary music production. The M-VAVE FM-1 occupies a very different part of the market: a small, inexpensive digital synthesizer with a compact display and limited physical controls. SHRUB brings a Serum-derived synthesis engine to that modest platform.
Developed by Steve Duda of Xfer Records, SHRUB draws primarily from the original Serum engine, with selected features from Serum 2. The project is in beta, and its appeal extends beyond the hardware: you can explore it in a browser without owning an FM-1.
What’s Actually Inside SHRUB?
The reported feature set is ambitious for the host hardware:
- Two wavetable oscillators plus sub and noise generation
- 64 factory wavetables and user-wavetable support
- Up to eight unison voices per oscillator
- Three envelopes and four LFOs
- A 16-slot modulation matrix
- Multiple filter types
- A seven-slot effects rack
- An arpeggiator and eight-lane motion sequencer
- Approximately 100 factory presets
Effects include distortion, chorus, delay, compression, reverb, and equalization. These features don’t mean SHRUB is identical to Serum 2: the smaller platform requires meaningful compromises.
Four Notes, One Filter
SHRUB is limited to four-note polyphony. That’s workable for basses, leads, arpeggios, and many electronic music parts, but it constrains sustained chords and long releases. Its shared stereo filter also behaves differently from Serum’s per-voice filtering, particularly on polyphonic patches with moving filter modulation. Some modulation sources are shared across voices.
You Don’t Need the Hardware
SHRUB’s browser editor can generate audio without an FM-1 connected, and a browser-based FM-1 emulation lets prospective users explore the instrument before buying hardware. A VST3 implementation has also been developed, although beta availability and supported features may change; consult the official site for current downloads.
The software version runs code associated with the embedded synthesis engine rather than behaving like an entirely conventional, desktop-optimized plugin. That can make CPU usage surprisingly substantial. Browser performance also depends on the host computer and audio configuration.
Can It Load Serum Presets?
SHRUB supports importing compatible Serum 1 FXP presets and exporting sounds for Serum 2. Translation is necessarily imperfect where a patch relies on modulation, effects, or other capabilities that SHRUB doesn’t implement. Compatibility is a useful starting point, not a promise that every preset will sound identical.
What About Sound Quality?
With matching synthesis settings, the software and hardware versions are intended to produce equivalent digital synthesis results. The FM-1’s converter, analog output stage, output level, and noise floor remain hardware-specific variables. A proper comparison would capture the FM-1 output and compare it with the software output at matched levels, rather than assuming either is superior.
A Different Kind of Hardware Instrument
Alternative firmware changes the economics of a low-cost synthesizer. Instead of buying a different box for each new instrument concept, users can repurpose the same hardware. SHRUB is an independent project, not an official M-VAVE product. Replacing factory firmware has risks, so installation instructions and compatibility should be checked carefully.
Is SHRUB Open Source?
No. SHRUB is free to use, but free software and open-source software are not synonymous. Its availability does not imply that its source code can be modified or redistributed.
The Bigger Picture
SHRUB is interesting not simply because a sophisticated synthesis engine fits in a cheap box, but because it questions how much dedicated hardware a useful instrument really needs. Four-note polyphony, shared filtering, and limited physical controls are genuine constraints. They don’t necessarily make the instrument less creative.
The ability to experiment with SHRUB in a browser makes the proposition even more compelling: the synthesis engine is available to explore before anyone spends money on the hardware. Whether it becomes a lasting part of the FM-1 ecosystem remains to be seen, but it is a notable example of what thoughtful software can do with modest hardware.
SHRUB — Fast Facts
Developer: Steve Duda / Xfer Records
Type: Wavetable synthesizer and alternative firmware
Hardware: M-VAVE FM-1
Software: Browser editor and emulator; VST3 developed (check current beta availability)
Polyphony: Four notes
Price: Free
Status: Beta
Official website: shrub.audio
Editor’s note: This is an introductory technical feature based on published specifications and developer information, not a hands-on listening review. We will update our assessment after listening tests.


